Understanding ePSA codes

ePSA codes are a set of information that guides the user about errors within the computer system. There are several errors that can occur; Furthermore, it is quite difficult to address these errors. The ePSA error code is basically a number that contains the information about the error. Different error codes have different explanations and solutions. If you don’t know the ePSA error codes, or if you haven’t encountered one yet, it is recommended to check the Dell technical support phone number. Also, you can talk to IT professionals by calling 1 800 723 4210.

cpu error

The ePSA error code for this issue is 2000-0111. This is a problem that takes place on the motherboard of the computer. Also, it causes the processing unit to malfunction. You can get more knowledge about this factor by committing to 24/7 customer support. The solution to this problem is briefly discussed below.

Update your system BIOS

If the update doesn’t help, replace the motherboard or processor.

computer battery error

Here the ePSA error code is 2000-0131; this implies system battery dysfunction. Also, this error can prevent the computer from starting, because the battery is not in its proper function.

To counter this problem, you must first shut down the computer

Make sure the system power code is off

Open the case of your computer and eject the battery.

Put the battery back in its position. Also, if the error persists, replace the battery and consider the technical support number.

Hard disk drive (HDD) error

The error code is now ePSA 2000-0141, this is certainly an HDD error. In this case, the system may report that the hard disk drive (HDD) cannot be found or located. Even though the hard disk drive is correctly installed, the system still cannot read it. This error occurs in the event that the hard drive is not installed. If you experience this problem, consider the following resolution.

If you have a laptop, simply reboot the hard drive. In case you have a desktop computer, disconnect the data cable and power cable from the hard drive. Plug in both cables and make sure they are properly connected.

If the solution mentioned above doesn’t work, replace your hard drive.

If you are still experiencing the issue, feel free to call the toll free number.

optical drive error

Another more common problem is the optical drive, the error code for this problem is ePSA 2000-0147. In this scenario, every time that you insert a disc into the optical drive, the drive cannot read the disc. Also, your system might inform you that there is no Blue ray or DVD drive installed. Below is a short instruction on how to solve this problem.

Turn off your computer and avoid any electrical connection

Identify the faulty optical drive and disconnect the device and its connections and cables.

Now connect the cables to the optical device and restart the computer.

If the optical drive still shows an error, call the customer support number for further assistance.

Understanding AMI Beep Patterns

If the AMI beep code is a short one, then it may result in a DRAM failure. A two-short code means that the parity circuit has failed. While the three short beeps occur when there is a RAM failure. Also, the system timer failure is associated with four short beeps. Consider the technical support number for help.