Just for a moment, think about how careful you are when you dock and undock your boat. If you are docking or undocking at your own dock, of course you are being very careful not to damage your own ship or your own dock. Otherwise, if you’re not maneuvering your dock, you’re being very careful not to damage your ship, right? We all take pride in our property for various reasons. As careful as you are, how many times have you hit or rubbed your own dock pilings? No matter how careful you are, there are several uncontrollable factors, such as wind, rain, and tide, that make a difference in how your boat moves and responds.

While our primary reason for applying dock protection is to protect our property, we need to think about the damage that could occur when other boaters come and go from your dock. You have more experience coming and going in your own environment and you know how the outside elements will affect it. Others may not have that experience or knowledge.

Dock bumpers can provide protection against those bumps and dents that are almost unavoidable when the water gets rough, and can save you those potentially expensive repair costs.

Dock bumpers are lightweight, flexible and can be placed on various parts of the dock. The most useful are the ones that attach directly to the edges of a dock and run parallel to the side of a boat when docked, but you can also choose to install corner bumpers and post bumpers that attach to boat posts and columns. roof for added security. As a bonus, installation is easy and they tend to be resistant to fungus, so once they’re in place, you won’t have to spend a lot of time worrying about them.

What to consider when buying dock bumpers:

One thing to consider if you are installing dock bumpers yourself is the material you will be using. If you don’t use galvanized steel bolts and brackets, the materials will break in the wind and waves, damaging your dock. In the long run, it’s worth spending the extra costs up front rather than replacing it later.

You’ll also want to be sure you have strong and durable protective bumpers. Your dock protectors will last long if you make sure the product is reliable to begin with. Installing durable dock bumpers is the best way to avoid damage and those high repair costs.

Dock bumpers also come in various colors. You’ll want to compare products and choose a product that is not only sturdy and will withstand the outdoor elements, but also enhances the appearance of your dock and outdoor or recreation area.

Dock bumper installation steps:

1. Take measurements from the dock. Measure the spring with the tape measure to determine the overall length of the spring. Use these measurements when purchasing your dock bumper.
2. Determine the height. Position the boat next to the dock and measure the height of where the dock bumper should be placed. Set the bumper at the proper height to ensure that the boat does not slide under the bumper when docked.
3. Install the mounting bracket and hardware using the measurements determined in step two and according to the instructions. Use the cordless drill and level to mount the bumper mounting bracket.
4. Install the bumper. Slide the bumper onto the mounting bracket and make sure it is secure.

Tips: Please use silicone or other sealant to seal all screw holes as the bumper is mounted in a humid environment.